automated electromagnetic switch assembly line

First, automatic electric switch assembly line

1. The device uses automated equipment for electrical switch assembly;

2. The equipment carrier is a 12 out of 12 assembly structure, which can complete the assembly of 12 products at the same time;

3. touch screen control, parameter setting, output calculation;

4. With SMEMA excuse to communicate with other devices, with statistical data monitoring output, equipment failure information and automated rejection systems;

5. The device UPH is about 2600PCS/H;

6. Fault alarm shutdown, operation is automatic mode;

7.Possible to greatly increase production while ensuring the reduction of personnel; product quality and yield will also be higher.

Second, automatic material placement and appearance inspection line

Note: The modified waterline is the mature standard adhesive backing machine of our company and the process planning of the accessories on the customer's mobile phone motherboard. The last stop is the automatic appearance and auxiliary material review machine to improve the inspection quality and efficiency.

High efficiency: The same production can save 70% of staff.

High quality: Our company has 5 years of mature customer experience in backing machines, and has rich experience in non-label accessories. The equipment is stable and reliable to ensure product quality.

Third, audio automatic assembly and test assembly line

1. The audio is automatically assembled, and the parts can be automatically assembled on the bottom case, automatically lock the speaker, automatically mount the fixed seat, automatically twist the subwoofer, automatically install the shell, automatic lock panel, automatic loading handle, automatic loading handle, automatic Install pulleys, etc. to achieve automatic. Can adapt to different sizes of audio.

2. With a special lock attachment module, deep hole 150mm can also be attached; XYZ three-axis plus high torque R-axis quickly and accurately grasp and tighten the subwoofer.

3. The positioning fixture adopts up and down recirculation method. The rollers are driven on both sides. The position of the fixture of the station adopts taper pin lifting and precise alignment. The size of the fixture can be universal.