Главная> Блог> How to correctly judge the quality of Varnish?

How to correctly judge the quality of Varnish?

January 29, 2023
From experimental theory, the chemical composition of the coating oil should be determined. From the application point of view, it is a simple way to check the quality of the varnish purchased by the user.

1 Smell smell. UV oil solids content of more than 95%, the solid content of volatile substances is very small. Therefore, a good lacquer oil taste is small and should be less odor than printing ink. The smaller the smell after curing, the better.

2 measured solvent content. The varnish was placed in a graduated vessel (diameter less than 50 mm) and the paper was placed for 12 h to observe how much was evaporated. The decline in the surface position is generally not seen. If the drop is clearly observed, it means that there is too much solvent in the coating oil, which is a shoddy product that the original varnish was added with thinner.

3UV Varnish is a non-conjunctival material. Like edible oils, the surface will not be crusted for a long time. A small amount of varnish was placed on the surface of the glass piece, and the crusting phenomenon was observed after placing it in the light-shielding place for 24 hours. Non-skinning instructions are UV oils, otherwise false UV oils.

4 irritation to the skin. Put a small amount of glazing oil on the back of the hand and observe for 20 minutes to see if the skin becomes red or blisters. The good lacquer skin basically fails to respond, and the general lacquer will show erythema. The bad gloss oil will make the skin blister. .

5 Observe the color of the UV oil. The UV ink was placed in a transparent glass container. The lighter the color, the better the quality.

6 viscosity. According to different coating machine models, choose different viscosity, such as the ordinary three-roller, fangs polishing machine viscosity of 30 ~ 40s.

7 leveling. Check the print after curing, corrugated shows poor leveling. The solution is to reduce the viscosity, heat or add thinner; second, extend the coating and curing time to make it fully level and then cure.
Связаться с нами

Author:

Ms. Sandy

Phone/WhatsApp:

+8618550184339

Популярные продукты
You may also like
Related Categories

Письмо этому поставщику

Тема:
Электронная Почта:
сообщение:

Your message must be betwwen 20-8000 characters

Связаться с нами

Author:

Ms. Sandy

Phone/WhatsApp:

+8618550184339

Популярные продукты

Главная

Product

Phone

О нас

Запрос

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Отправить